Network Infrastructure Design TemplatePart 1: Complete the Router Networking TablesTable 1 lists the current Router Networking and Information for the organization. For your Part 1, use the information in this table to complete Tables 2, 3, and 4 below. Add additional rows if necessary.Table 1: Current Router Networking and Information Site number Orlando Site Router 1 Management VLAN IP – 192.168.1.0 Production VLAN IP – 192.168.11.0 Internet VLAN IP- IP Assignments Loopback – 10.1.1.1/32 VPN Tunnels TBD – based on requirements Phoenix Site Router 1 2 Management VLAN IP – 192.168.2.0 Production VLAN IP – 192.168.22.0 Internet VLAN IP- IP Assignments Loopback – 10.2.2.2/32 VPN Tunnels TBD – based on requirements Phoenix Site Router 2 3 Management VLAN IP – 192.168.3.0 Production VLAN IP – 192.168.33.0 Internet VLAN IP- IP Assignments Loopback – 10.3.3.3/32 VPN Tunnels TBD – based on requirements Toronto Site Router 4 Management VLAN IP – 192.168.4.0 Production VLAN IP – 192.168.44.0 Internet VLAN IP- IP Assignments Loopback – 10.4.4.4/32 VPN Tunnels TBD – based on requirements Table 2: Orlando Site Net ID Usable Range Subnet Mask CIDR Value Broadcast Table 3: Phoenix Site Net ID Usable Range Subnet Mask CIDR Value Broadcast Table 4: Toronto Site Net ID Usable Range Subnet Mask CIDR Value Broadcast Part 2: Design the Network Infrastructure Create a network drawing using Visio or Draw.io, specific to this organization listing the network’s topology. In your diagram, include any necessary hardware. The drawing should include enough detail to show the interconnections of the topology. The viewer should be able to understand the Bacon Enterprises network environment.All devices require hostnames and should use the following naming conventions:Routers: Rx; where x is the site numberSwitches: Sx; where x is the site numberInclude necessary details for high availability.Any external source that is consulted should be cited properly.When you are finished, save the diagram as a PDF and submit it to the Assignment folder along with this template. Note: You will need to use this diagram in Project 3, so save the source file.